Airsurfer / 05 / Guides
A color temperature chart shows how white light changes from a warm appearance at lower kelvin values to a cooler appearance at higher values. For a ceiling fan light, start with the lamps already in the room, choose the lighting scene you use most, and compare the actual settings offered by the model. Use the chart below to make a shortlist, then check the result in the room.
WHITE-LIGHT APPEARANCE
2700 K | warm yellowish white
3000 K | warm white
4000 K | cooler white
5000 K | daylight-like white
Reference chart · Available settings depend on the model.01 / 05
Start with the kelvin number
Correlated color temperature, or CCT, is measured in kelvins, written K. It describes the appearance of white light. A label such as warm, neutral or daylight is useful for orientation, but the kelvin number makes comparisons more consistent. Record each fixture's stated CCT before comparing products. The chart describes lighting appearances; use the selected fan's specifications for its available settings.
Color temperature comparison chart
Swipe the table to compare all details →
| Reference CCT | White-light appearance | Room trial |
|---|---|---|
| 2700 K | Warm, yellowish white | Compare with warm bedside or table lamps during evening use. |
| 3000 K | Warm white | Try with warm living-room fixtures and familiar wood or fabric finishes. |
| 4000 K | Cooler white | Compare with task lighting in a shared activity area. |
| 5000 K | Daylight-like white | Try in the intended activity area and compare adjacent fixtures. |

02 / 05
Match the lighting scene
For a room used mainly to relax in the evening, begin by matching the warm lamps that normally remain on. For a shared room used for reading and everyday activities, try the central light alongside the task lamp. A study desk can have its own focused light while the ceiling fan provides general illumination. Choose each layer around the activity instead of asking one central fixture to perform every lighting task.
03 / 05
Compare one variable at a time
First compare the available CCT settings at a similar brightness. Look at the walls, wood finishes, fabrics and faces from the positions where people sit. Then adjust brightness to suit the activity. Keep separate notes for color appearance and light output. If one setting feels too bright, test the supported dimming adjustment before discarding that color temperature.
Run a repeatable evening comparison. Use the same seating position and the same nearby lamps for each available CCT setting. Begin at a comfortable, similar brightness and compare familiar wall, wood and fabric colors. Record the setting you prefer and any visible mismatch with the lamps normally used together.
Then adjust supported dimming while keeping that CCT selected. If the room is comfortable for relaxing but the desk remains difficult to use, test the task light separately. This distinguishes a color choice from a placement or output problem.
04 / 05
Check the controls before choosing
Record whether CCT is fixed, selected with a switch, or changed through the supplied control. Check the exact model instructions for the available settings and what happens after power is turned off. Test any lighting memory function described for that model. Keep the preferred setting and the control sequence with the household instructions so the room returns to the intended lighting scene.
Complete a room-lighting trial
Swipe the table to compare all details →
| Record | What to enter | Decision |
|---|---|---|
| Existing lights | Fixture location, kelvin value and normal use | Pick the lighting scene to match. |
| Fan light | Model and actual selectable CCT values | Keep only settings available on that model. |
| Nighttime trial | Setting, brightness and visible mismatches | Choose the preferred combination. |
| Power cycle | Setting before and after switching off | Confirm the everyday control sequence. |
Check how the preferred scene is restored. Record the actual control action required to return to the selected lighting state.
Swipe the table to compare all details →
| Trial | Record |
|---|---|
| Normal evening use | CCT, brightness and other lamps switched on |
| Light switched off through its control | Setting when restarted |
| Normal wall-switch use | Result compared with the manual |
| Fan-only use | Whether the chosen lighting state is retained as documented |
Where the model offers several settings, keep the chosen sequence simple enough for everyone using the room. Resolve unclear memory behavior with the exact model instructions before treating it as a feature.
Frequently asked questions
Is 4000K brighter than 3000K?
Use lumens to compare light output. Kelvin describes the white-light appearance. Compare both values and the supported dimming settings.
Should every light in a room have the same CCT?
Start with a similar CCT for lights normally used together. A separate task light can use a different setting when that arrangement suits the activity.
Can I change CCT on an existing fan light?
Check the fan model and light-module instructions. Use the settings and replacement parts specified for that assembly.
Choose a fan light for the room
Compare the published lighting settings, dimming and controls on the models you are considering.
Explore Fans with Lights ↗